USA ▼
Products > Noise Dosimeters > doseBadge > Industrial OSHA / NIOSH

doseBadge Industrial Noise Dosimeter

doseBadge Industrial
doseBadge Industrial
doseBadge Industrial doseBadge Noise Dosimeter doseBadge Charger Noise Dosimeter Kit Contents

Price List

CK112/1
$2268.00
OSHA Kit - 1 doseBadge, Reader, Charger, Software, Case
Lead time 1 week

CK112/2
$2961.00
OSHA Kit - 2 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK112/3
$3654.00
OSHA Kit - 3 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK112/5
$5040.00
OSHA Kit - 5 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK112/10
$9116.00
OSHA Kit - 10 doseBadges, Reader, Charger, Software, Case
Lead time 1 week
CK110/1
$2268.00
NIOSH Kit with 1 doseBadge, Reader, Charger, Software, Case
Lead time 1 week

CK110/2
$2961.00
NIOSH Kit with 2 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK110/3
$3654.00
NIOSH Kit with 3 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK110/5
$5040.00
NIOSH Kit with 5 doseBadges, Reader, Charger, Software, Case
Lead time 1 week

CK110/10
$9116.00
NIOSH Kit with 10 doseBadges, Reader, Charger, Software, Case
Lead time 1 week
CR112A
$694.00
Individual doseBadge - OSHA regulations
Lead time 1 week

CR110A
$694.00
Individual doseBadge - NIOSH regulations
Lead time 1 week

RC110A
$1501.00
doseBadge Reader and Calibrator
In stock

CU110A
$426.00
Charger for up to 5 doseBadges
In stock

UA110
$40.00
doseBadge Windshield
In stock

RC101A
$136.00
Keyfob Remote Control
In stock

CM100
$27.00
doseBadge Helmet Mount
In stock

The delivery price is calculated during checkout based on your location and the goods ordered. Our basic delivery prices are:

Delivery within USA: $40.00

Delivery Service: Five working days*

* For products that are in stock and the order received by midday.

Some products go through a final configuration and calibration before being shipped. If the calibration labs are busy this can add up to two days on to the delivery schedule but guarantees a fresh calibration.

CK112/5
$5040.00
OSHA regulations Noise Dosimeter Kit with 5 x OSHA doseBadges
1 week

CK110/5
$5040.00
NIOSH regulations Noise Dosimeter Kit with 5 x NIOSH doseBadges
1 week

Features

  • Strong metal case
  • Shoulder mounted noise dosimeters
  • OSHA or NIOSH noise dose
  • No cables, controls or display
  • 15 Year Warranty

Applications

  • Occupational noise surveys
  • OSHA or NIOSH noise regulations
  • Factory noise
  • Noise dosimetry
  • Hearing protection
  • Mining - see Intrinsically Safe doseBadge

Overview

The Industrial version of the doseBadge is for measuring the noise dose or noise exposure of workers in line with the OSHA or NIOSH regulations.

The doseBadge is mounted on a worker's shoulder in order to measure close to the ear, held in place by clips to the worker's clothing. It measures the sound levels throughout the work shift and provides the noise dose % and time weighted average (TWA) along with many more parameters. When downloaded to a computer it even provides a graph of the sound levels throughout the shift, so you can see when the noisy times were.

Virtually Indestructible

The doseBadge Industrial is enclosed in a cast alloy case, making it extremely strong but lightweight. Drop it and stand on it, but it will be fine.

Protected within the alloy case is the microphone, acoustic processor and rechargeable battery. To reduce the risk of damage and tampering there are no controls or display on the doseBadge itself. Measurements are started and stopped using the doseBadge Reader, which is included in the kit.

Occupational Noise Regulations

dosebadge noise dosimeter
Shoulder Mounted Noise Dosimeter

The noise exposure rules for most industries in the U.S. are set by OSHA or NIOSH. The action levels for these two bodies are different, as are the noise parameters that should be measured. While we have noise dosimeters that can be set to meet multiple regulations, the doseBadge Industrial keeps things simple by working to either OSHA or NIOSH regulations.

  • OSHA noise - order codes CK112/x
  • NIOSH noise - order codes CK110/x

'x' is the quantity of doseBadges in the kit.

It is important that you use a noise dosimeter that meets the standards, in the case of noise dosimeters this is ANSI S1.25, and that you use a Calibrator before and after every measurement to check the dosimeter's function. The doseBadge meets these requirements.

doseBadge Noise Dosimeter

The doseBadge noise dosimeter is the part that mounts on the worker's shoulder. It is a small, lightweight device that should not interfere with the worker's duties.

dosebadge noise dosimeter
dosebadge mounting clips

 
The doseBadge is mounted on the worker's shoulder using two clips. Other mounting methods are available.

dosebadge mounted on worker

 
Weighing just 1.8oz, the doseBadge has no cables or controls, making it safer around machinery and limiting the effects of tampering.

The dosimeter should be fitted to the worker at the start of the day or working shift and left to measure the total noise exposure.

Noise Measurements Made

These are the most useful measurements made by the doseBadge Industrial:

  • TWA - time weighted average
  • Dose % - exposure as a percentage
  • Lavg or LAeq - the A weighted average sound level
  • Peak - the maximum peak pressure
  • Time History - average every minute

The OSHA version of the doseBadge has two channels, one measuring with a threshold of 80 dB and the other with a threshold of 90 dB. This is needed for the two types of measurements needed for this particular set of regulations. The NIOSH version of the doseBadge has one channel set to meet the requirements of NIOSH and the other channel can be configured as required, in case you have other regulations to meet.

Noise Dose Exceeded

noise dose level exceeded

The doseBadge can be set to indicate when the noise dose has exceeded 100%. Under normal conditions, the blue LED flashes once every second. When the noise dose limit is exceeded, it flashes twice every second.

Start of the Work Shift

  • Fit the doseBadge into the Reader and press the Reset key to clear its memory
  • Calibrate the doseBadge by pressing the Cal key
  • Attach the doseBadge to the worker using the supplied mounts
  • Point the Reader at the doseBadge and press the Run key

Leave the doseBadge measuring for the full working shift...

End of the Work Shift

  • Point the Reader at the doseBadge and press the Stop key
  • Remove the doseBadge from the worker and fit it onto the Reader
  • Press the Cal key if you want a second calibration
  • Press Read to transfer the results to the Reader
  • Put the doseBadge on to charge to be ready for another day's monitoring

The measurements can be viewed on the Reader's built in graphic screen or they can be transferred to a computer for storage, analysis and reporting. The Reader can download a number of doseBadges before the measurements are transferred to a computer, so it is only necessary to carry the Reader on site.

Using the Reader

calibrating the dosebadge
Calibrating the doseBadge
start and stop dosebadge noise dosimeter
Start and Stop Measurement

doseBadge Software

The doseBadge kits include the NoiseTools software, which is used to download the measurements from the Reader and produce noise reports.

  • Download, store and organize noise measurements
  • View measurements on screen
  • Produce reports then print or export them for sharing
  • Link measurements to people, places or projects
  • Backup and archive noise measurement data

The NoiseTools software runs on a Windows PC, supporting versions 7, 8 and 10. There are no license restrictions so it can be installed on as many computers as needed.

doseBadge Dosimeter Kits

Although doseBadges and Readers can be bought individually, they are usually included in a complete noise measurement kit that includes everything you need to make occupational noise measurements.

The CK112/x and CK110/x kits include:

doseBadgesStandard kits include 1, 2, 3, 5 or 10 doseBadge dosimeters, but other quantities can be supplied
ReaderOne Reader unit is used with multiple doseBadges
CalibratorBuilt in to the Reader unit
doseBadge MountsOne mount for each doseBadge
ChargerFor charging the doseBadge batteries
SoftwareThe NoiseTools software
CertificatesCalibration certificates for each doseBadge and Reader (calibrator)
Carrying CaseHolds all doseBadges, Reader, charger and manuals

Optional Items

dosebadge windshield

Windshield The doseBadge windshield not only reduces the noise from strong wind but also provides additional protection against light rainfall, dust and the noise generated by knocks against the microphone.

Helmet Mount These allow the doseBadge to be fitted on the side of a helmet that is fitted with earmuff mounts. Three types of mounts are available to suit the most common helmets.

remote control keyfob

Keyfob Remote Control The Keyfob can be used instead of the Reader to Start and Stop the doseBadge. You still need a Reader to calibrate and reset the doseBadge but the Keyfob is much more handy for use in the field.

StandardsANSI S1.25:1991 Personal Noise Dosimeters Class Designation 2AS-90/80-5
IEC 61252:1993 Personal Sound Exposure Meters
Reader's Acoustic Calibrator to IEC 60942:2003 Class 2
Range70 dB(A) to 130 dB(A) RMS
120 dB(C) to 140 dB(C) Peak
Stored FunctionsdoseBadge Settings, Calibration Record
Measurement Duration, Highest Peak (C) Sound Level
Overload Exceedance, Battery Status
115 dB(A) Maximum Sound Level Exceedance
1 Minute Time History of: Lavg (OSHA version), LAeq (NIOSH version), Peak Level, Battery Level
Lavg or LAeq, TWA, % Dose, Estimated % Dose
Weightings"A" for all RMS measurements.
"C" for Peak Sound Pressure
Configuration(second channel on NIOSH model)
Exchange Rate (3dB, 4dB or 5dB)
Criterion Level (80dB, 85dB, 87dB, 90dB)
Criterion Time (8hrs, 12hrs, 16hrs, 18hrs)
Threshold (None, 80dB, 85dB, 90dB)
Time Weighting (None, Slow)

Physical Properties

MemorydoseBadge: up to 24 hours of data in a single measurement
Reader: up to 999 individual doseBadge measurements
PowerdoseBadge: NiMH rechargeable battery
Reader: 2 x AA/LR6
CU:195A Power Adapter
OutputsdoseBadge: Infrared to RC:110A Reader Unit
Reader: USB 2.0 to computer
DimensionsMic. Apex Ø 0.5", Base Ø 1.8", Height 1.5"
WeightdoseBadge: 1.6oz
Reader: 14oz
Temperature14°F to +122°F Operating
-4°F to 140°F Storage
HumidityUp to 95%RH Non-Condensing

Product Reviews - doseBadge Industrial Noise Dosimeter

Review count: 1. Average rating: 5.0


★★★★★ 5 star rating

Verified NoiseMeters customer, Thu Nov 11 2021

Really good noise meters and associated software. The company offered great support getting us set up.

AMS Solutions

Reply Fri Nov 12 2021
 
Hi David, Many thanks for the review it is always useful to get feedback regarding our products and support. Kind regards Mike

NoiseMeters

Product Reviews Policy

We only publish reviews provided by verified customers, who have purchased the product that is shown on this page. This ensures that the review is genuine and provided for the product listed. These reviews are for the doseBadge Industrial Noise Dosimeter.

Please note that these are all product reviews and so should give you an impression of the quality of the product and how well it carries out its intended functions.

If you would like to provide a review for the "doseBadge Industrial Noise Dosimeter" then please email us on info@noisemeters.com and we will send you the product review link.