| |
doseBadge for Measuring a Worker's Exposure to Noise
- IEC 61252 and ANSI S1.25 to Type
2
- Noise Dosimeter for measuring a worker's exposure to noise
- Suitable for ISO, OSHA, MSHA, AICHE and ACGIH noise applications
- Intrinsically Safe
version available
- No wires or controls on the badge to catch or knock
- Very rugged cast aluminum case
- Powered by a rechargeable battery
- Reader controls doseBadges by infra-red
- Time
history gives a graph of noise levels
- Noise measurement span from 70 to 130 dB(A)
- True Peak reading from 120 to 140 dB(C)
- Time history includes Peak dB(C) and the Battery
- 115 dB(A) Sound Level flag
NEWS
- New Features Added May 2007 |
 |
| |
|
 |
The doseBadge system is the perfect solution
for the measurement of a worker's exposure to noise.
The badge is small and light, with no cable or controls (all
control is via the infra-red link). There is also a
huge cost saving where multiple dosimeters are required as
the cost of multiple badges is much less than that of traditional
noise dosimeters. The Reader has a built in doseBadge calibrator
and can either display the results of measurement on its display
or transfer them to a computer using the software supplied.
Multiple doseBadge measurement kits contain charging units
that charge all the doseBadges at the same time. Also see
our How to Use the doseBadge
page.
An intrinsically safe
version is available for use in hazardous environments and
explosive atmospheres. |
The doseBadge can be used to measure a worker's exposure to noise
in most parts of the world. For use in the USA the doseBadge is
usually set to run in OSHA, MSHA, AICHE or ACGIH mode. For Europe
it is run in the ISO setting. The doseBadge has two channels, and
so can, for example, run in both OSHA and ISO 3dB at the same time.
The individual settings can be changed very easily to meet most
other regulations. Please visit the Regulations
page for more information.
The doseBadge Product Web Site
has more information about the noise dosimeter
Additional Documentation |
|
