Noise Dosimeter and Hand-Held Noise Meter Combinations

The Octave Band Combination Kit is ideal for applications with mobile and stationary workers, especially where the noise levels and exposure can sometimes be extremely high (greater than 95 dBA). At such high levels care should be taken when selecting the best hearing protectors.

The dBadge noise dosemeter can be used to monitor the workers' daily noise exposure, being particularly suited for very mobile workers and those in environments where it is difficult or unsafe to use a sound level meter.

The CEL632B2 Sound Level Meter can be used for spot checks and monitoring stationary workers. When the noise levels are very high the Real-Time Octave Band Measurements can be downloaded to a computer for further analysis. Using this method you can assess whether the hearing protection is adequate for the sound levels and frequency content of the noise.

Noise Combination Kit Contents Noise Dosimeters: dBadge Noise Dosimeters (mount on the workers shoulder) Clip and Pin mounts for the dBadges dBadge 3-way Charger (two included in the CMB620A2/10) Sound Level Meter: Type 2 Integrating CEL632B2 Sound Level Meter Insight Software for the dBadge and CEL630 series Sound Level Calibrator Calibration Certificates for dBadges, Sound Level Meter and Calibrator Carrying Case