Industrial Noise Monitoring System If you have an industrial operation that is based in an area where industrial and residential buildings are mixed, we have a number of systems that take the hard work and uncertainty out of noise monitoring and complaint handling. For Mixed residential and industrial areas Monitor noise and answer complaints Generate concise reports of noise events Short and long term noise monitoring systems Continuous storage of noise measurements

Noise in Mixed Industrial and Residential Area

Noise Monitoring - Mixed Residential and Industrial

Our fixed and portable noise monitoring systems can accurately measure the noise levels on a continuous basis, storing the sound levels, noise events and results of statistical analysis on a central computer or network.

One or more noise monitors can be installed around the site, usually on the boundary, and these connect back to the computer using one of the many methods available - direct cabling, phone line, GSM modem, radio modem, network link. Portable monitors can be used if they need to be relocated on a regular basis. A mix of fixed and portable monitors can be used on the same system.

Complaint Handling

The noise measurements are stored in both the noise monitor and on the central computer. If a complaint is received, the operator can quickly check through the data and generate reports that can be used in responding to the complaint.

Hopefully this does not have to be done too often.

Historical Data and Noise Planning

All measurements are kept on the central computer, so the noisiest periods can easily be assessed and suitable controls put in place. If there is a need to reduce noise emissions then graphs of the sound level over long periods of time are essential. Evidence of compliance may also be needed to meet planning approval. All equipment is of the correct grade and class for this.

Integration to Existing Systems - SCADA, 4-20mA

If you have an existing system (e.g. SCADA), we can offer the NoiseSensor Class 1 microphone system, which offers the industry standard 4-20mA output. These microphones can be mounted inside or outside and be connected via very long cable lengths to your system. Integrating into a SCADA or similar system and presentation of the noise levels is then carried out by your staff.