Your region
 
Tel.  888-206-4377
info@noisemeters.com
Home > Products > Optimus > Yellow > Using It
 

Optimus Yellow - Sound Level Meter

The Optimus Range
Overview Measurement Using It Software Options    
 

Using the Optimus Yellow

The Optimus range of sound level meters have a single measurement span and measure all the noise parameters at the same time. This means that you do not have to think about a range setting (there isn't one) or which measurements you need first. Just switch on and make the measurement.


Power Up

The meter takes just four AA batteries (included), which should last at least 16 hours - that's a lot of noise measurements.

 
switch on
 
optimus sound level meter optimus yellow sound level meters optimus red sound level meter optimus green sound level meter optimus purple sound level meter
optimus range of sound level meters
   
Start the Measurement  
   
start noise measurement

Press the Start button to begin the noise measurement

Once running, the meter will show the current sound level along with the maximum and minimum levels. Other parameters can be viewed (such as "C" weighted and "Z" weighted levels) by using the up and down arrow keys.

If you have the data logging option then the meter is already storing measurements.

   

Stop the Measurement

stoppedThe end the measurement process, press the Stop button. The display will show the most common measurement parameters: Maximum Sound Level and Minimum Sound Level with the usual "A" weighting applied. Using the up and down keys, you can also view the "C" and "Z" weighted values.

If you have the data logging option installed then the measurement is automatically stored at this point.

 

 

Email Address
info request
Telephone 888-206-4377  
info@noisemeters.com  
Home - Contact - Applications - Products - Rental - News - Resources - Search - Help
Sound Level Meters - Dosimeters - Noise Signs - Microphones & Calibrators